1. Once the surface has been properly cleaned and completely dry, apply A.R.T. with a soft, lint-free cloth.
2. Apply enough A.R.T. directly on the cloth to spread over at least one whole window or door segment; ring out the excess liquid.
3. Wipe on a thin coat in one direction – do not go back over A.R.T.
4. When the cloth no longer provides adequate coverage, re-wet with A.R.T.

Note: If A.R.T. gets on adjoining surfaces, wipe free. Product applied too heavily will remain tacky and attract dust and airborne particles. A.R.T. should not be applied over previously applied coatings. If coated, remove it with the appropriate stripper. This system will not restore pitted anodized aluminum. Once pitting has occurred, exposing bare metal, only repainting will fix the surface.

 Rinsing: