

Chemical - EaCo Chem - HotStain Remover


Chemical - Stain Remover - EaCo Chem - OneRestore




Chemical - EaCo Chem - HotStain Remover


Chemical - Stain Remover - EaCo Chem - OneRestore


Chemical - Stain Remover - EaCo Chem - HD Britenol


Chemical - EaCo Chem - A.R.T. Anodized Aluminum Restorer Gel




Chemical - EaCo Chem - HotStain Remover


Chemical - Stain Remover - EaCo Chem - OneRestore


Chemical - Stain Remover - EaCo Chem - HD Britenol




Description
Graf-Ex
Outstanding Removal of Inks & Paints
Graf-Ex is an easy-to-use, multipurpose modern day stripper designed to be utilized where safety and performance are of equal importance. It is a non-dilutable product that is outstanding at removing inks and paints from painted surfaces.
Graf-Ex does not harm most substrates, and will not raise the grain of wood, cause flash rusting in metal or damage fiberglass. Graf-Ex is also an excellent adhesive remover, from decals to construction adhesives.
Dilutions:
Use undiluted (straight).
Coverage Rates:
Coverage rates will vary from 100 – 250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining.
Application Instructions:
Apply to a dry surface with a low-pressure spray unit or wipe on using a cloth. Spray product on from the top down in an overlapping, side to side motion. A damp cloth is often all that is necessary to remove paint or ink. The material works better at an ambient temperature of 70° Fahrenheit range.
Occasionally two applications (one following the other after a short soak time) will outperform a single application and mechanical removal. The material penetrates very quickly. Dwell times will vary with the thickness of the coating to be stripped. Graf-Ex can remove most materials in fifteen minutes.
Rinsing:
Craftsmanship determines the appropriate pressures for rinsing. A thorough rinse job is always recommended; however, our chemistry never requires flooding a wall. Pressures that mark or damage the surface should be avoided. When in doubt, follow the manufacturers recommended P.S.I. for the substrate on which you are working.
Note: Proper ventilation should always be used when working indoors. It is recommended that skin contact be kept to a minimum and at least a water rinse after contact.
Customer Reviews
Be the first to review this product.
Add a Review
Account
Log in
New Customer
Create an account with us and you'll be able to:
- Check out faster
- Save multiple shipping addresses
- Access your order history
- Track new orders
Forgot Password
Forgot Password
Fill in your email below to request a new password. An email will be sent to the address below containing a link to verify your email address.