



SKU: 922G
Standards: OSHA, ANSI, CSA Z259.10
D-Rings: Back
Gemtor full-body harnesses distribute the forces generated during a fall over at least the thighs, pelvis, chest, and shoulders. The standard sliding back D-ring helps to suspend a fallen worker in an upright position after the fall.
Model # 922 - Lightweight, sub-pelvic, polyester full-body harness. Ideal when a worker is assigned his own harness. Once adjusted the quick connect buckles on the chest and leg straps make donning and doffing fast and simple with additional adjustment necessary only when compensating for seasonal clothing changes.
Inspect all equipment before each use and destroy any gear that is damaged, worn or does not pass inspection. Any person using HIGH-RISE products is responsible for the proper care and maintenance of these products.
You must read and fully understand all instructions, or have all instructions explained to you, before attempting to use this equipment. Equipment must not be installed, operated or inspected by anyone who does not understand this Owner's Manual. Failure to observe these instructions could result in serious injury or death. Careless or improper use of this equipment can result in serious injury or death. Training and instruction review should be repeated at regular intervals. If you have questions regarding these instructions or need additional copies, call Gemtor, Inc. at 1-800-405-9048.
OSHA LINKS: http://www.gemtor.com/osha.htm