

SKU: RG-xxxx-3LS
MIO creates many pieces of window washing equipment for high rise buildings as well as other rope access gear. This rope grab is used as a part of a fall arrest system and ideal for any vertical ascending and descending. Rope attachment is straight forward and very secure using the push pin. The MIO rope grab has an integrated 3' shock absorbing lanyard that connects to your harness with a snap hook. Once placed on the rope, this rope grab will automatically brake at the place it was last placed. To descend, manually move the device by lifting the lanyard to release the lever (don't adjust the device by grabbing it directly!). In case of a fall, the gravity activated lever clamps down on the rope to bring you to a stop without damaging the rope itself.
Device | Weight | Compatible Lanyard | Dimensions | Usability | Rope Compatibility | Anti-Panic | ANSI |
---|---|---|---|---|---|---|---|
MIO RG Back Up Rope Grab | 41.6oz |
Included Lanyard with Snap Hook |
5.375"L x 3"W x 5.375"H *all measurements without lanyard and snap hook |
Manual | 7/16", 1/2", or 5/8". KMIII is compatible. See Manual for list of other recommended ropes. | ![]() |
![]() |
DISCLAIMER: Information on this page was last updated on 5/15/2020. For the latest information, refer to manufacturer’s instructions. Any information provided by abc is intended to help you decide which gear will work for you and is not a substitute for proper training and your evaluation of specific work site conditions. Work at height is inherently dangerous. User accepts full responsibility for the use of this and any other safety equipment. ABC OFFERS NO EXPRESS WARRANTIES AND DENIES THE EXISTENCE OF ANY IMPLIED WARRANTIES. ANY WARRANTIES WITH RESPECT TO THE PRODUCTS SOLD ARE PROVIDED BY THE MANUFACTURER.