Petzl, leader in high rise window cleaning gear, along with many other types of height safety gear, created the Rescucender to easily connect and disconnect as apart of a haul or progress capture system for 7/16, ⅜, and ½ inch rope (9-13mm). This petzl rope grab uses a cam loaded lock to capture progress. It is easy to add and remove from the rope at any point. Per Petzl, the Rescucender is not suitable for use in a fall arrest system!
- Visual Indicator to show if device is fully closed.
- Easily add and remove the device at any point.
|Device||Weight||Compatible Lanyard||Dimensions||Usability||Rope Compatibility||Anti-Panic||ANSI|
|3.25"L x 1.5"W x 4.25"H||Manual||19-13mm Rope Kernmantle|
- NFPA 1983 T (when used with 10-13mm rope), CE EN 12841 B, CE EN 567, EAC
Lanyard and Carabiner
DISCLAIMER: Information on this page was last updated on5/18/2020. For the latest information, refer to manufacturer’s instructions. Any information provided by abc is intended to help you decide which gear will work for you and is not a substitute for proper training and your evaluation of specific work site conditions. Work at height is inherently dangerous. User accepts full responsibility for the use of this and any other safety equipment. ABC OFFERS NO EXPRESS WARRANTIES AND DENIES THE EXISTENCE OF ANY IMPLIED WARRANTIES. ANY WARRANTIES WITH RESPECT TO THE PRODUCTS SOLD ARE PROVIDED BY THE MANUFACTURER.
Be the first to review this product.
Add a Review
Fill in your email below to request a new password. An email will be sent to the address below containing a link to verify your email address.