Jump to:

rofilter.png

 

waterfedbasics.png

waterfedexpert.png

issuessolutions.png

SG1

The Triple Crown SG1 WaterFed Cart has no need for a power outlet, it runs on the pressure coming out of the tap. It weighs 65 lbs and is capable of producing up to 1.000 gallons of pure water per minute running off of a tap pressure of 60 psi.

The core of its filtration is a replaceable RO membrane. The membrane allows the unit to process higher than average TDS and contributes to a low cost per gallon for pure water production. The SG1 comes with dual RO outlets allowing users to quickly bypass the DI filter when cleaning solid surfaces, presoaking or in areas with low TDS. This unit also utilizes Carbon and DI filters larger than most entry-level systems. 

This system is ideal for professionals just getting started in high TDS areas by who want to be able to upgrade without replacing the whole system. Perfect for frequent use cleaning 1-3 stories without needing a pump. The SG1 unit can be upgraded to an SG2 with the addition of an AC powered pump. 

Includes:

  • SG1 System
  • Handheld TDS Meter
  • Shutoff valve
  • Owner's manual

Getting started with a SG1 WaterFed system (2018 and after) 

Getting started with a SG1 WaterFed system (2018 and after) 

This video is a helpful guide to show you how to change your SG1 filter (2018 and after) 

How to purge air from your SG1 System 

Getting started with a SG1 WaterFed system (before 2018) 

This video is a helpful guide to show you how to change your SG1 filter (before 2018) 

SG2

The Triple Crown SG2 WaterFed Cart's AC powered unit produces 2.500 gallons of pure water per minute of pure water but can be run without a pump with sufficient source water pressure.

The core of its filtration is a replaceable RO membrane. The membrane allows the unit to process higher than average TDS and contributes to a low cost per gallon for pure water production. The DI filter can be bypassed for RO only operation in situations where water quality is high enough to produce water with less than 10 TDS. The RO only operation allows those cleaning solid surfaces to produce water with 40 TDS or less from source water without using a DI filter. The unit also features a rapid drain which allows the user to reduce the overall weight of the unit when lifting into their vehicle at the end of the day.

Perfect for frequent use cleaning 1-6 stories. 

Includes:

  • SG1 System
  • Handheld TDS Meter
  • Shutoff valve
  • Pressure Gauge
  • Owner's manual

Getting started with a SG2 WaterFed system (2018 and after) 

Getting started with a SG2 WaterFed system (2018 and after) 

This video is a helpful guide to show you how to change your SG2 filter (2018 and after) 

Learn how to purge air from your SG2 System 

Getting started with a SG2 WaterFed system (before 2018) 

This video is a helpful guide to show you how to change your SG2 filter (before 2018)